Oneball clear protective film 2.5"x24"x9.5mm
|Availability:||In stock (1)|
Nano-Tech clear film is stretchy, light weight, and very tough. Use it on critical rub and flying rock areas. It will protect frame and lowers on forks extremely well. It's an excellent choice to use on frame top tubes, fork lowers, and the top and sides of chainstays.
Clear, self-healing, waterproof adhesive.
Use: Frame / Fork Protection
Shape: DIY rectangle shape to be cut into pieces
Apply: Clean and dry bike. Wipe down area where Nano-Tech film will be applied with Isopropyl alcohol. Mark and measure areas to be applied. Cut to size, round corners for better adhesion. Wet area with water and smooth into place with the middle first, them flatten the sides. Squeeze out bubbles. Pop bubbles with a pin if needed. Cut relief cuts where needed to get material to lay flat in curves. Use of a hair dryer can be helpful.